Attention for ESP32-C3
USB é Serial/JTAG, não USB OTG de uso geral.
SIDE-BY-SIDE COMPARISON
Compare up to four families by processor, memory, connectivity, interfaces, security and industrial application. Always consult official sources before finalizing the hardware.
Choose 2 to 4 families
Minimum 2 and maximum 4 families per comparison.
| Specification | ESP32-C3 | ESP32-C6 | ESP32-S3 |
|---|---|---|---|
| Processor and memory | |||
| Architecture | RISC‑V | RISC‑V | Xtensa LX7 |
| Cores | 1 | 1 HP + 1 LP | 2 |
| Clock | Até 160 MHz | Até 160 MHz | Até 240 MHz |
| Coprocessor/ULP | Núcleo RISC‑V | Núcleo LP RISC‑V | ULP RISC‑V |
| AI/DSP acceleration | Sem acelerador dedicado | Sem acelerador dedicado | Instruções vetoriais para DSP/IA |
| SRAM | 400 KB | 512 KB | 512 KB |
| Flash | Externa, tipicamente 4 MB em módulos | Externa; tipicamente 4–8 MB em módulos | Externa; variantes de módulo até 32 MB |
| PSRAM | Não integrada | Externa em variantes compatíveis | Externa; variantes de módulo até 32 MB |
| Connectivity | |||
| Wi-Fi | Wi‑Fi 4 · 2,4 GHz | Wi‑Fi 6 · 2,4 GHz | Wi‑Fi 4 · 2,4 GHz |
| Bluetooth | Bluetooth LE 5 | Bluetooth LE 5.3 | Bluetooth LE 5 |
| IEEE 802.15.4 | No | Yes | No |
| Ethernet | Sem MAC Ethernet | Sem MAC Ethernet | Sem MAC Ethernet |
| USB | USB Serial/JTAG | USB Serial/JTAG | USB OTG + Serial/JTAG |
| Digital interfaces | |||
| Maximum GPIO | Até 22* | Até 30* | Até 45* |
| UART | 2 | 3 | 3 |
| SPI | 3 | 2 | 4 |
| I²C | 1 | 2 | 2 |
| I²S | 1 | 1 | 2 |
| TWAI/CAN | 1 controlador | 1 controlador | 1 controlador |
| PWM | LEDC | LEDC | LEDC + MCPWM |
| SD/SDIO/MMC | Sem host SD/MMC dedicado | Sem host SD/MMC dedicado | SD/SDIO/MMC |
| Analog resources | |||
| ADC | 12 bits, até 6 canais* | 12 bits, até 7 canais* | 12 bits, até 20 canais* |
| DAC | Não | Não | Não |
| Capacitive touch | Não | Não | Até 14 canais* |
| Temperature sensor | Sim | Sim | Sim |
| Industrial engineering | |||
| Recommended industrial use | Sensores, controladores compactos e produtos de volume | Matter, Thread, Zigbee e sensores multiprotocolo | HMI, visão, áudio e processamento local |
| Field buses | TWAI nativo; RS‑485 exige transceptor | TWAI nativo; RS‑485 exige transceptor | TWAI nativo; RS‑485 exige transceptor |
| Security | Secure Boot, flash encryption, HMAC e assinatura digital | Secure Boot, flash encryption, HMAC e assinatura digital | Secure Boot, flash encryption, HMAC e assinatura digital |
| OTA update | Suportado pelo ESP-IDF | Suportado pelo ESP-IDF | Suportado pelo ESP-IDF |
| Power profile | Baixo | Baixo | Moderado |
| Official sources | |||
USB é Serial/JTAG, não USB OTG de uso geral.
Matter depende do SDK e da arquitetura da rede; não é um periférico físico.
Flash, PSRAM e GPIO disponíveis variam bastante entre módulos.